Home Profile Products Enquiry Contact Us
Grate / Grill Magnets
Hump Magnet
Roller Type Magnetic Separator
Plate Magnets
Channel Magnet
Hopper Magnets
Electro Magnetic Vibratory Feeder
Spout Magnet
Drawer Magnet
Suspension Magnets
Magnetic Drum Pulley
Drum Type Magnetic Separator
Inline Drum Type Magnetic Separator
Wet Drum Separator
Permanent Magnetic Belt Type Separator
Magnetic Coolant Separator
Overband Magnetic Separator
Hand Magnets
Magnetic Floor Sweeper
Electromagnetic Pulsating Vibrator
Horse Shoe Magnet / U Shape Magnet
 
Overband Magnetic Separator

Suspended Permanent Magnetic Overband Separators are designed to eliminate tramp metal from the product carried by belt, vibratory feeders or inclined planes.

Over bands are mainly used to protect Machine such as Crushers, Shredders and others, to remove ferrous particles and purify products (Industries like Foundries, Coal Mines, Cement Works, Food, Sponge Iron, Char coal, Glass, Chemical Industries and Domestic waste recycling Plants.)

 

The permanent Magnetic Overband Separators are used when an automatic Removal of ferrous contamination is necessary. If not, fixed Permanent Suspension Magnets are more suitable.

 

Applications:

Five type of Separators Re designed to operate at a predetermined working gap over the conveyor: 100, 150, 200, 250 and 300mm.
The speed of the belt, the nature of the product, its density, its granulometry and the size of the pieces that have to be extracted are one of the parameters to be taken into consideration when choosing the type of Overband.

Construction:
Two U-section pieces are fixed on the Magnet by fastening ears and are supporting bearings of Drums. Drums are equipped with shafts mounted on removable hubs. All bearings equipped with stakes for tightening the belt.
The belt is driven by a Reduction Gear Coupled to Electric Motor / Geared Motor by Vee-belts.

 

Magnet Unit:
The Magnet is made of High Intensity Stroncium Ferrite Magnets and is guaranteed for the Magnetic Power through out the life of installation. A Non - Magnetic Stainless steel Plate is provided to cover the poles of Magnet. There is no need for any electrical supply or maintenance.

 

Installation:
These units can be installed either inline over the terminal head pulley (Fig - 1. ), or transversal to the conveyor (Fig - 2). In both cases, it is necessary to foresee Non- Magnetic products under the Magnetic Field.
The most effective position is inline (Fig - 1) over the head pulley. The material being conveyed is in virtual Suspension and Tramp Iron is therefore more readily extracted.
Very good results are obtained by combining a Permanent Magnetic Overband with Permanent Magnetic Pulley at discharge end.

 
 
Product Code : M - 17
 
Product Code : M - 17
     
Over Band
 
Over Band
     

Over Band

 
Over Band

Address : 12-15, First floor, Subzi Market,
Chowk Hauz Qazi, Delhi - 110006 India


Tel : +91 11 23272516, +91 11 23284296
Fax : +91 11 43081572 MOB : +91 9718 367 467

Home Profile Products Enquiry Contact Us

© Copyright All Rights Reserved
magnetsmanufacturers.com


Designed & Maintained By
India Infonet